Katrina Floor Attachment Kit - Stainless Steel
- Buy 12 for $29.99 each save 14%
- Buy 24 for $24.99 each save 29%
The Katrina Floor Attachment Kit is an optional accessory that allows you to anchor our Katrina series table legs into the floor, for a very secure installation. This floor attachment kit is only compatible with our 3" diameter Katrina legs. The kit is available in black or with a stainless steel cover, and the stainless model is sitable for outdoor use. The black floor attachment kits are 3.25" in diameter, the stainless floor attachment kit includes an additional brushed stainless steel cover that makes the overall diameter just under 3.5".
The floor attachment kit is great for Katrina legs supporting kitchen islands, outdoor table tops, or at the end of cantilevered table tops. This accessory is NOT meant to replace traditional bolt down bases, we do not recommend using a single Katrina leg to support a table top. Rather, this is a perfect solution when you need secure legs that will not move on the floor. The floor attachment kit is also great for outdoor patio tables, as they will be stay firmly in place, helping to prevent theft. The secured legs also keep tables from tipping over due to accidents or high winds.
The Katrina Floor Attachment Kit attaches to Katrina legs with a single bolt (and takes the place of the Katrina leg's adjustable foot). To install, you first place the floor attachment kit on the floor, predrill holes for 3 anchor bolts, then install the anchor bolts (not included). Firmly thread the included 8mm bolt into the central hole in the floor plate, and place the inlcluded stainless steel cover over the floor plate (stainless cover is not included with black floor attachment kits). Secure the bolt by threading on the included nut until it reaches the floor attachment plate, and tighten with a wrench. Remove the leveling glides from your Katrina legs, then thread the legs onto the bolt sticking up from the plate, turning the leg until it is tight and does not wobble. For the anchor bolts, we recommend drilling at least 2 inches down into cement floors. You will need 100mm (or 3/8") diameter anchor bolts for installation (not included).
*Estimated delivery for the Katrina Floor Attachment Kit is between 3-8 business days, depending on your shipping location.
**You may consider using non-permanent epoxy to help keep the bolt secure inside the leg.
Note: This plate will slightly raise the height of your Katrina legs (by .39" with the black floor attachment kit, and .43" with the stainless steel floor attachment kit). To compensate, we can custom cut your table legs before shipping, so that they reach your desired height even with the floor attachment kit. For custom cut options, please contact customer service.
|Availability||Usually ships in 2-5 business days|
|Ships From||New Jersey|
|Finish||Black Powder Coated Disc with Brushed Stainless Steel Cover|
|Outdoor Use||Stainless Steel Model Suitable for Outdoor Use|